Passat Sedan 4Motion W8-4.0L (BDP) (2002)
/Page-952006.png)
Wire resistance: max. 1.5 Ohms
-
Also check wires for short circuit to B+ and Ground (GND).
Specified value: infinity Ohms
-
Erase DTC memory of Engine Control Module (ECM), Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code. See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
If no malfunctions are found in wires:
-
Replace Motronic Engine Control Module (ECM) -J220-.
