Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Rapid data transfer
HELP
Select function XX
If displayed:
Control module not responding!
HELP
-
Press the -HELP- button to print out an overview of all of the possible malfunction causes.
-
Enter address word 17 for instrument cluster again after correcting malfunction and press Q button to confirm.
Overview of selectable functions
02 -
Check DTC Memory
05 -
Erase DTC Memory
06 -
End Output
08 -
Read Measuring Value Block
10 -
Adaptation
11 -
Login Procedure
NOTE:
-
Do not select the additional functions that are printed out via the HELP button.
-
After function is completed, the VAG 1551 returns to the start position:
Indicated on display:
Rapid data transfer
HELP
Select function XX
With Manufacturer Scan Tool
Diagnostic Trouble Code (DTC) memory, checking (function 02)
NOTE:
DTCs stored in memory along with corresponding malfunction descriptions can only be displayed by initiating the On Board Diagnostic program and
checking DTC memory (function 02).
-
Input address word 19 "Gateway" and then press -> button until "Select function XX" is shown in display.
Indicated on display (select function):
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -2- to select function 02, "Check Diagnostic Trouble Code (DTC) memory" .
Indicated on display:
Rapid data transfer
Q
02 - Check DTC memory
-
Press -Q- button to confirm input.
The number of stored malfunctions appears in the display.
X DTC recognized!
->
The number of stored DTCs or "No DTC s recognized" appears in the display and are printed out one after another.
-
When the last DTC has been displayed and printed out, rectify malfunctions as described in DTC table.
If "No DTC recognized" is displayed, the program will return to the initial position after pressing -> button.
No DTC recognized!
->
Indicated on display (select function):