Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Remove bolts -1-.
-
Remove bolts -2- and lower subframe.
-
Pull out bolts for locating control arm.
-
Pull ABS wheel speed sensor wiring out of retainer on brake caliper
-
Pull both lower control arms out of subframe.
-
Remove nuts -3- and -4-.
-
Remove bolts -5-
-
Loosen bolts -6- until subframe can be removed.
Installing
-
Install subframe and start bolts -5- and -6-.