Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Place triple-rotor star onto shaft according to previous markings and drive onto stop.
-
Install circlip and make sure it is correctly seated.
-
Install rollers onto triple-rotor star according to previous markings.
-
Slide joint housing over rollers and secure (clamp housing in vise).
-
Install rectangular sealing ring (arrow) from repair kit into groove.
Note: A seal is formed directly between the triple-rotor joint and the drive flange. The cover is no longer required.
-
Press 90 grams of grease from repair kit, into triple-rotor joint.
-
Press 90 grams of grease from repair kit behind triple-rotor joint.
-
Install joint protective boot.
-
Install clamp.