Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
/Page-1925002.png)
^
M 12x 1.5x95
^
Always replace each time after removing
17. Bolt
^
Turn 70 Nm (52 ft. lbs.) + 90° further
^
M12 x 15 x 95
^
Always replace each time after removing
18. 50 Nm (37 ft. lbs.)
19. Self-locking nut
^
95 Nm (70 ft. lbs.)
^
Always replace each time after removing
20. Eccentric washer
21. Wheel bearing housing
22. Eccentric bolt
23. Lower control arm
24. Eccentric bolt
25. Track rod
^
The bonded rubber mountings are not available as replacement parts
26. Bolt
^
95 Nm (70 ft. lbs.)
^
M12 x 1.5 x 85
27. Washer
28. Self-locking nut
^
Always replace each time after removing
29. Self-locking nut
^
95 Nm (70 ft. lbs.)
^
Always replace each time after removing
30. Eccentric washer
31. Bolt
^
Turn 70 Nm (52 ft. lbs.) + 90° further
^
M 12 x 15 x 100
^
Always replace each time after removing
32. Self-locking nut
^
Always replace each time after removing
33. Bolt
^
95 Nm (70 ft. lbs.)
^
M12x 1.5 x 80
34. Self-locking nut
^
95 Nm (70 ft. lbs.)
^
Always replace each time after removing
35. Bolt
^
95 Nm (70 ft. lbs.)
^
M12 x 1.5 x 80
36. Axle beam
