Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
Loosen bolt -A- on both sit
-
Unhook parking brake cables -B- out of retainer -C-.
-
Press locking tabs -A- together and push parking brake cables -2- out from control arm -1-.
CAUTION: Do not pull on parking brake cables or parking brake adjustment will be changed.
-
Remove brake caliper mounting bolts. Counter-hold on guide pins when changing.
-
Unbolt wheel speed sensor wiring -2-.
1. Securing pin
-
Unclip wheel speed sensor wiring from axle beam
3. Securing point to axle beam
-
Pull ABS wheel speed sensor out of wheel bearing housing.