Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
/Page-1556002.png)
^
16 bolts: M x 60
9. Valve body
^
Select correct version according to transmission code
^
Removing and installing
10. Retainer
^
For wiring harness
^
Engage wiring harness on bracket
^
Secured with bolts for valve body
11. Bolt
^
6 Nm (53 inch lbs.)
12. Transmission Vehicle Speed Sensor (VSS) -G38-
13. Spacer sleeve
^
Length: 8 mm
14. Internal oil line
^
Always replace
15. O-ring
^
Always replace
16. Speedometer Vehicle Speed Sensor (VSS) -G22-
^
Replacing
17. O-ring
^
Always replace
18. Multi-function Transmission Range (TR) switch -F125-
19. Bolt
^
8 Nm (71 inch lbs.)
20. O-rings
21. Securing clip
^
Always replace
22. Wiring harness
^
Transmission fluid temperature sensor -G93- integrated in wiring harness
^
Remove and install valve body in order to replace wiring harness
^
Disengage harness from retainer -10-
^
Position of harness connector on harness: flat part of rear collar faces toward oil pan; lugs on collar are horizontal
23. Bolt
^
6 Nm (53 inch lbs.)
24. Sensor for transmission RPM -G182-
^
Replacing
25. Spacer sleeve
^
Length: 20 mm
26. Bolt
^
6 Nm (53 inch lbs.)
27. Retainer
^
For solenoid valve
28. Solenoid valve
4. N91-
^
With O-ring
^
To replace: remove and install valve body
29. Solenoid valve 3 -N90-
^
Without O-ring
^
To replace: remove and install oil pan
30. Solenoid valve 2 -N89-
^
Without O-ring
^
To replace: remove and install oil pan
31. Bolt
^
6 Nm (53 inch lbs.)
32. Retainer
^
For solenoid valves
33. Solenoid valve 6 -N93-
^
With O-ring
^
To replace: remove and install oil pan
34. Solenoid valve 7 -N94-
^
With O-ring
^
To replace: remove and install oil pan
35. Solenoid valve 5 -N92-
^
With O-ring
^
To replace: remove and install oil pan
36. Solenoid valve 1 -N88-
