Passat Wagon L4-2.0L Turbo (BPY) (2008)
8
Clutch Pedal
‹› Removing and installing, refer to => [ Clutch Pedal ] See: Clutch Pedal and Hydraulics.
9
Nut
‹› Refer to - item 15 -.
10
Hose/Line Assembly
‹› Remove the battery and battery tray, in order to remove.
11
Bracket
‹› Secured to the body.
‹› Covered by the assembly mounting.
‹› For the hose/line assembly - item 10 -.
12
Plastic Line
‹› Remove the battery and battery tray, in order to remove.
13
Bracket
‹› Secured to the body.
‹› Covered by the assembly mounting.
‹› For the plastic line - item 12 -.
14
Seal/O-ring
‹› Installed onto the line connection.
‹› Install with brake fluid.
15
Bleeder
16
Clip
‹› To remove and install the hose/line assembly or plastic line and bleeder, pull the clip out to the stop.
17
Vent Valve
‹› Bleed the clutch system, refer to => [ Clutch System, Bleeding ] See: Clutch Hydraulic System/Service and Repair/Procedures.
18
Dust Cap
19
Clutch Master Cylinder
‹› Can only be replaced when the transmission is removed.
‹› Removing and installing, refer to => [ Master Cylinder ] See: Clutch Pedal and Hydraulics.
20
Transmission
Seal/O-ring for the Hose/Line Assembly or Plastic Line