Volkswagen Workshop Service and Repair Manuals

=> Overview, Page 37-94

Dismantling planetary gearbox ,

Assembling gearboxes up to 06.99 => page 37-123 .

Assembling gearboxes from 07.99 => page 37-135

• Bolt, 20 Nm
• ATF pump
• ◆ Dismantling and assembling => Page 38-1
• Gasket
• ◆ For ATF pump
• Brake band -B2-
• ◆ 2nd and 4th gear -brake-
• ◆ Adjusting => Page 37-154
• ◆ Store in fitted position => Page 37-114
• ◆ Fit piston push rod -item 19 - and adjustment screw -item 6 - in the formed part of the brake band

• Nut, 45 Nm
• Adjustment screw
• ◆ For brake band -B2-
• ◆ Always renew
• ◆ Adjusting the brake band => Page 37-154
• Shim
• ◆ Determining thickness => Adjusting clutch play between -K2- and ATF pump, Page 37-155
• Reverse gear clutch -K2-
• ◆ Dismantling and assembling
• Axial needle bearing
• ◆ Observe installation position

• 1st to 3rd gear clutch -K1- with turbine shaft
• ◆ Dismantling and assembling => Page 38-5
• Axial needle bearing
• ◆ Observe installation position => Page 37-104
• Input shaft
• Axial needle bearing with washer
• ◆ Observe installation position => Page 37-104
• Large sun gear
• Drive pinion
• ◆ Dismantling and assembling => Page 39-13
• ◆ Spare part is allocated according to gearbox code letters

• Gearbox housing
• Circlip
• Cover
• ◆ With operating piston for 4th gear
• Operating piston for 2nd and 4th gear brake
• ◆ For brake band -B2-
• ◆ Spare part is allocated according to gearbox code letters
• Spring
• Spring