On display of fault reader -V.A.G 1551- the control unit identification is indicated, e.g.: |
–
| Switch ignition off and then on again. |
Note The coding entered will be activated by switching the ignition off and then on again. If after entering the valid code the ignition is not switched off and on again, the fault “Control unit incorrectly coded” cannot be erased. |
–
| Adapt diesel direct injection system control unit -J248- to the electronic immobilizer → Chapter |
|
|
045906019 1.4l R3 EDC 0000 SG 1040 -> | Coding 00002 WSC 00000 |
|