volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing fuel tank with its attachments and fuel filter > < Removing and installing coolant pump
4-Cyl. injection engine (4 valve, roller rocker finger), Mechanics
Removing and installing parts of fuel supply system
Removing and installing parts of fuel supply system

Notes:

  • ◆ Hose connections are secured with either spring-type or clamp-type clips.
  • ◆ Always replace clamp-type clips with spring-type clips.
  • ◆ Fuel hoses in engine compartment must only be secured with spring-type clips. The use of clamp or screw-type clips is not permissible.
  • ◆ V.A.G 1921 pliers are recommended when installing spring-type clips.

Observe safety precautions .

Observe rules for cleanliness => Page 20-9 .

Removing and installing fuel tank with attachments and fuel filter => Page 20-2 .

Servicing accelerator mechanism => Page 20-26

Adjusting throttle cable => Page 20-27

Removing and installing parts of the activated charcoal filter system => Page 20-29 .

Removing and installing fuel tank with its attachments and fuel filter > < Removing and installing coolant pump