Polo Mk3
| Thermostat side, engine codes AEE, AER, AEX, AKV, ALL, ANX, APQ |
| 1 - | Bracket |
| q | For central connector |
| 2 - | Self-tapping bolt |
| 3 - | From bottom of radiator |
| q | → Item |
| 4 - | Connection |
| 5 - | O-ring |
| q | Renew |
| 6 - | Thermostat |
| q | Check function: Heat up thermostat in water. The pin of the thermal element must move out. |
| q | Temperature check: Opening starts (approx. 84 °C) and ends (approx. 98 °C) cannot be checked. |
| 7 - | To expansion tank |
| q | → Item |
| 8 - | To heat exchanger |
| 9 - | From expansion tank |
| q | → Item |
| 10 - | Retaining clip |
| 11 - | From heat exchanger |
| 12 - | Coolant pump housing on cylinder block |
| 13 - | Seal |
| q | Renew |
| 14 - | Coolant pipe |
| 15 - | Thermostat housing |
| 16 - | 10 Nm |
| 17 - | Coolant temperature sender -G62- |
| q | With coolant temperature display sender -G2-. |
| 18 - | Plug |
| 19 - | To top of radiator |
| q | → Item |
