volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing headlight range control motor for headlights with gas discharge bulb > < Renewing main beam bulb

Polo Mk3

Renewing side light bulb
Renewing side light bulb
Removing:
–  Disconnect battery → Chapter.
–  Remove headlight → Chapter.
–  Remove gas discharge bulb control unit → Chapter.
   
–  Unscrew bolt -1- and remove cover cap -2-.
  N94-0444
–  Pull holder with bulb on connector out of reflector -arrow-.
Installing:
  Note
Do not touch glass envelope when fitting a new bulb. Fingers leave traces of grease on the glass envelope, which evaporate when the bulb is switched on and cause the glass envelope to cloud over.
–  After changing bulb, push bulb with holder into reflector onto stop.
–  Fit sealing cap.
–  Install gas discharge bulb control unit → Chapter.
–  Install headlight → Chapter.
–  Check function of headlight.
–  Check headlight settings and adjust if necessary → Booklet.
  N94-0421

Removing and installing headlight range control motor for headlights with gas discharge bulb > < Renewing main beam bulb