Polo Mk4
Front panel (2007 ►) - work position |
– | Remove the front bumper cover → Chapter. |
– | Remove the front grille → Chapter |
– | Remove the front bonnet latch → Chapter. |
– | Disengage the front bonnet latch operating cable from the latch. |
– | Remove one screw -9- from each longitudinal member and install the guide pin -3411--7- rods to the longitudinal members on the right and left sizes. |
– | Remove the screws -9- and -3- and pull the front panel forward in the rod area of the guide pins -3411--7-. |
Note
When installing screw -3-, apply to the thread anaerobic adhesive -D 000 600 A2- or low-viscosity locking adhesive → Chemicals Manual |