–
| Disengage the bellows -3- from pillar A. Disconnect the connectors from pillar A. |
–
| Remove the nut -2- from the upper hinge axle -1-. |
–
| Remove the lower screw -4- from the hinge with the wrench -3320- and the multi-teeth bits -3320/3-3320/3. |
Tightening torque: 20 Nm + 1/4 (90°) |
–
| Raise the door, removing it from the hinge. |
Note This screw must always be replaced. |
|
|
|