Volkswagen Workshop Service and Repair Manuals > Polo Mk4 > Body | General body repairs, exterior | Rear door,sliding door,wing doors,central locking | Rear door

Door - remove and install

–	Remove the lower pillar B covering → Body - Internal assembly works; Rep. Gr.70

–	Remove the bellows -3- from pillar B. Disconnect the pillar B connectors from the coupling station.

–	Untighten the nut -1- from the upper hinge axle.

Tightening torque: 14 Nm

–	Untighten the lower screw -2- from the hinge.

Tightening torque: 20 Nm and turn + ¹/₄ back (90°)

Note

This screw must always be replaced.

–	Raise the door, removing it from the hinge angle.

Volkswagen Workshop Service and Repair Manuals