volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Safety belt without pre-tensioner|Installation > < Assembly overview

Polo Mk4

Removal
Removal
  Note
The removal and installation is described for the left safety belt. The removal and installation for the right safety belt is made in an analogue manner.
   
–  Remove the door sill trim → Chapter.
–  Remove upper and lower B pillar linings → Chapter.
–  Remove the lower fastening point -8- from the front safety belt → Chapter.
–  Remove the fastening screw -2-.
–  Remove the direction device -3-.
–  Remove the safety belt positioning device -6- (for different versions).
–  Remove the fastening screw -4-.
–  Remove the fastening screw -7-.
–  Remove the inertia reel together with safety belt -5- from B pillar.
  N69-0223

Safety belt without pre-tensioner|Installation > < Assembly overview