| –
| Note the coding in vehicles with code radio equipment, request such coding if necessary. |
| –
| Disconnect the battery. |
| –
| Place an adequate number of lint-free cloths in the area around the water reservoir, engine and transmission. |
| –
| Aspirate as much as possible the brake fluid from the reservoir by using the Brake filling and bleeding equipment -VAS 5234- or Brake filling and bleeding equipment -V.A.G 1869-. |
| –
| Close the clutch cylinder return hose with Clamps (diam. 25 mm) -3094- |
| –
| Disconnect the clutch cylinder return hose. |
| –
| Disengage the connector on the Brake oil level warning contact -F34-. |
| –
| Release the brake pipes on the brake cylinder and close them with the plugs from the repair set number ET 1H0 698 311 A. |
| –
| Release the brake cylinder nuts. |
| –
| Carefully remove the servo brake cylinder. |
|
|
|
