| For all fuel supplying/injection jobs, the “6 cleaning rules” must be strictly followed: |
| t
| Carefully clean connection points and surrounding areas before disconnecting them. |
| t
| Removed parts must be placed on a clean surface and covered. Do not use cloths that tear residues off! |
| t
| For repairing jobs which won't be immediately executed, carefully cover open parts or place them in a proper location. |
| t
| Install only clean parts: Remove replacemet parts from packaging only immediately before assembly. Do not install parts that have been kept out of packaging (in a tool box for example). |
| t
| In case of an open system: Avoid operations with compressed air. Avoid moving vehicle. |
| t
| Ensure there is no contact between diesel and cooling hoses. If necessary hoses must be immediately cleaned. Affected hoses must be replaced. |
|
|
|
