volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Camshaft and cylinder head cover - remove and install > < Camshaft seal - replace|Removal

Polo Mk4

Installation
Installation
–  Quickly lubricate the sealing lip of the seal with oil.
   
–  Install the Sleeves -3241/2- on the camshaft journal.
–  Move the seal through the guide sleeve.
–  Remove the guide sleeve.
  N15-0249
–  Press the seal with the Sleeve -T10022/1- and the Screw -T10015/3- up to the stop. Insert a washer between the pressure sleeve and hex screw.
–  Install the camshaft gear and tighten the new screw using the Pin wrench -3036-. Tightening torques for the new screw: 20 Nm + 90°.
–  Continue installation in the reverse sequence to the removal.
Installing the toothed belt and adjusting command times → Chapter.
  N15-0250

Camshaft and cylinder head cover - remove and install > < Camshaft seal - replace|Removal