Polo Mk4
| Crankshaft flange (pulley side) - remove and install |
| Special tools and workshop equipment required |
| t | Wrench -3415- |
| t | Assembly sleeve -T 10053- |
| t | Torque wrench - 5 to 50Nm (fit. 1/2") -VAG 1331- |
| t | Torque wrench - 40 to 200Nm (enc. 1/2") -VAG 1332- |
| t | Manual drill with plastic brush insert |
| t | Silicone sealing agent -D 176 404 A2- |
| t | Flat scraper |
