volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Electrohydraulic steering box (JTEKT) - disassemble and assemble > < Electrohydraulic steering boxG250 - remove and install|Removal

Polo Mk4

Installation
Installation
–  Install the Power steering sensor -G250- on the steering box. Tightening torque, see → Item.
–  Connect the connector to the motor/pump set.
Vehicles with air conditioning:
   
–  Install the radiator fan control unit -1- on the longitudinal member fastening the nuts -arrows- to 6 Nm.
Continued for all vehicles:
  R48-10068
–  Install the cable -1- of the Electrohydraulic steering sensor -G250- on the support -arrow B-.
–  Close the spacer -arrow A-.
  R48-10080
–  Install the cable -1- of the Electrohydraulic steering sensor -G250- on the support -arrow B-.
–  Install the left front wheel case cover → Body - External assembly works; Rep. gr.66.
–  Install the wheel and tighten the screws → Chapter.
  R48-10076

Electrohydraulic steering box (JTEKT) - disassemble and assemble > < Electrohydraulic steering boxG250 - remove and install|Removal