| Installation is performed in reverse sequence to the removal,
observing the following: |
Note | t
| The supports and sensors are supplied without painting. |
| t
| The sensor supports must be placed before the bumper covering
is painted, and the sensors must be painted before assembly. |
| t
| Sensors may be painted with a layer of 100 µm only. To paint
the sensors, it is necessary to disconnect the connector. |
| t
| Avoid mechanical damages or damages caused by chemical agents
to the sensors. |
| t
| The internal supports with the designations HLI (Hinten Links
Innen - behind, left side, internal) and HRI (Hinten Rechts Innen
- behind, right side, internal) or the external supports with the
designations HLA (Hinten Links Aussen - behind, left side, external)
and HRA (Hinten Rechts Aussen - behind, right side, external) have
identical conception. The installation below is described for one
of the supports. |
|
|
|
