Adjusting handbrake

Make

Volkswagen

Model

Polo Mk5

Section

Brake, brake mechanics › Assembly overview - handbrake lever › Adjusting handbrake

Running gearAdjusting handbrake

Adjusting handbrake A new adjustment is only necessary when the handbrake cables, brake backplate or brake linings are renewed. –  Remove centre console extension, → General body repairs, interior; Rep. gr.68. –  The foot brake must be functional and bled. –  Release handbrake. –  Firmly depress brake pedal three times. –  Pull handbrake lever on 4 notches.

–  Tighten adjusting nut -A- until both wheels are difficult to turn by hand. Adjustment nut -A- must be screwed over end of pull rod -1-. –  Release handbrake and check that both wheels turn freely. If required turn adjustment nuts back slightly. –  Install centre console extension. → General body repairs, interior; Rep. gr.68. Due to the automatic rear wheel brake adjustment there is no requirement to adjust the handbrake after making new/initial adjustment.

01 Steering & suspension