Polo Mk5
| Assembly overview - hydraulics (RHD) |
| 1 - | Brake fluid reservoir |
| 2 - | Spring-type clip |
| q | Not fitted in all vehicles |
| 3 - | Supply hose |
| q | Rubber |
| q | From 12. 05, plastic → Fig. |
| 4 - | Master cylinder |
| q | Removing and installing, Polo 2002 ► → Chapter |
| q | Removing and installing, Polo 2010 ► → Chapter |
| 5 - | Retainer |
| q | Renew only with master cylinder removed |
| q | Removing → Fig. |
| q | Pressing on → Fig. |
| 6 - | Clutch pedal |
| 7 - | Clip |
| q | Pull clip out to stop to remove pipe/hose line |
| 8 - | Self-locking hexagon nut, 25 Nm |
| q | Always renew |
| 9 - | Brake lines |
| 10 - | Bracket |
| q | Secured to body |
| 11 - | Bracket |
| q | Secured to body |
| q | For brake lines and pipe/hose line |
| 12 - | Bracket |
| q | Secured to body |
| q | For brake lines and pipe/hose line |
| 13 - | Seal / O-ring |
| q | Pull onto line connection |
| q | Insert with brake fluid |
| q | Seals/O-rings are adapted to configuration of line connection → Fig. |
| q | Allocation → Electronic parts catalogue (ETKA) |
| 14 - | Pipe/hose line |
| q | Allocate using → Electronic parts catalogue (ETKA) |
| 15 - | Bracket |
| q | Secured to body |
| q | Only in Polo 2002 ► |
| q | Allocate using → Electronic parts catalogue (ETKA) |
| 16 - | Bracket |
| q | Secured to slave cylinder of gearbox |
| q | Only in Polo 2002 ► |
| q | Allocate using → Electronic parts catalogue (ETKA) |
| 17 - | Hexagon bolt, 20 Nm |
| 18 - | Dust cap |
| 19 - | Bleeder valve |
| q | Bleeding clutch system → Chapter |
| 20 - | Flange bolt |
| q | → Item |
| 21 - | Slave cylinder |
| q | Removing and installing → Chapter |
| 22 - | Clip |
| q | Pull out clip to stop to remove and install pipe/hose line |
| 23 - | Gearbox |
