volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Oil circuit > < Checking oil pressure

Polo Mk5

Removing and installing oil pressure switchF1
Removing and installing oil pressure switch -F1-
Removing
–  Remove engine cover panel → Chapter.
   
–  Remove crankcase breather hose -1-, press release buttons for this.
–  Free vacuum hoses -arrows-.
–  Release hose clips -3- and pull air hose off air filter housing.
–  Unscrew bolt -2-, swing intake hose with intake connection to rear and pull off of turbocharger.
  A21-10437
–  Unscrew bolts -2- and -3-, remove engine lifting eyes -1-.
–  Disconnect electrical connector -arrow-.
–  Remove oil pressure switch -F1-.
Installing
l  Specified torques → Fig. → Chapter.
Installation is carried out in the reverse order; note the following:
  Note
Renew the seal.
–  Install vacuum line to exhaust gas recirculation cooler.
–  Install intake connection.
  A17-10550

Oil circuit > < Checking oil pressure