Volkswagen Workshop Service and Repair Manuals > Polo Mk5 > Vehicle electrics | Communication | Infotainment | Aerial systems | Removing and installing aerial modules

Removing:

Note

Removal and installation is performed in the same manner on the left and right sides.

Before beginning dismantling work, perform the following steps:

–	Switch off ignition and all electrical consumers and remove ignition key.

To renew an aerial module, the rear lid trim must first be removed → General body repairs, interior; Rep. gr.70.

–	Release connectors -arrows- on aerial module and disconnect them.

–	Remove securing bolt -arrow-.

–	Push then aerial module in direction of -arrow-.

This releases the locking lug on the right of aerial module and the fastening of the aerial module on the left of the plate clamp.

–	Remove aerial module from body in direction of -arrow-.

Volkswagen Workshop Service and Repair Manuals