R32 4Motion V6-3.2L (CBRA) (2008)
Front Fender Liner: Service and Repair
Front Wheel Housing Liner
Front Wheel Housing Liner
NOTE: Removing and installing is described only for the left wheel housing liner. Removing and installing right wheel housing liner is
similar
Removing
Rear part of wheel housing liner
-
Unbolt wheel
-
Remove bolts - 2 - (Qty. 7).
-
Remove rear part of wheel housing liner - 1 -.
Front part of wheel housing liner
-
Remove bolts - 4 - (Qty. 11).
-
Remove front part of wheel housing liner - 3 -.
Installing
To install, perform the steps used for removal in reverse order.