R32 4Motion V6-3.2L (CBRA) (2008)
Spoiler: Service and Repair
Retaining Strip
Retaining Strip
Removing
-
Roof edge spoiler is removed
-
Cut through adhesive bead - 2 - with help of cutting cord and pull handles.
Installing
-
Adhesive surfaces - 2 - on retaining strip and rear lid are primed.
-
Apply adhesive bead in retaining strip depression.
-
Center retaining strip - 4 - on original brake light cutout - 3 -.
-
Secure retaining strip with commercially available adhesive tape.