R32 4Motion V6-3.2L (CBRA) (2008)
Brake Pedal Assy: Description and Operation
Brake Pedal Assembly Overview
CAUTION!
^
The path of the brake pedal must not be shortened via extra floor mats.
Before installing, lubricate all mounting points with grease, part No. G 000 602.
1 - Mounting bracket
2 - Self-locking hex nut, 25 Nm
3 - Brake light switch F
^
Includes brake pedal switch F47
^
On vehicles from 11.06.05, brake light switch F is located on brake master cylinder
^
Clip brake pedal at pressure rod of brake booster before installing brake light switch
^
Lubricate tappet head with polycarbamide grease G 052 142 A2.
4 - Hex head screw
5 - Brake pedal
6 - Cover
7 - Ball socket
8 - Mount
^
For ball head of brake servo push rod
9 - Self-locking hex nut, 25 Nm
10 - Bushing
11 - Pivot pin