R32 4Motion V6-3.2L (CBRA) (2008)
Crankshaft: Service and Repair
Crankshaft Sensor Wheel
Crankshaft Sensor Wheel, Installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
^
D 154 100 A1 Locking compound
Procedure
Make sure the crankshaft sensor wheel contact surface is free of oil and grease.
Note:
^
Sensor wheel may only be installed once, since attachment points - arrows - of countersunk screws - 1 - in sensor wheel - 2 - are so severely
deformed after tightening the second time that bolt heads make contact on the crankshaft - 3 - and sensor wheel lies loosely under the bolt
heads.
-
Apply a thin coat of locking compound "D 154 100 A1" to contact surfaces of crankshaft and sensor wheel for additional security.
-
When installing, make sure that marking -VR6- - arrow - stands at individual threaded hole.
-
Tighten all new bolts lightly by hand.
-
First, tighten bolt - 1 - to 10 Nm + an additional 90° (1/4 turn).
-
Then, tighten bolts - 2 - to 10 Nm + an additional 90° (1/4 turn).