R32 4Motion V6-3.2L (CBRA) (2008)
Crankshaft Gear/Sprocket: Service and Repair
Sealing Flange Assembly Overview
Note:
^
Secure engine to engine and transmission holder VAS 6095 when working on engine.
1 - 100 Nm + 1/2 turn (180°)
^
Replace
^
Use counter-holder tool T10069 for loosening and tightening
^
Tighten using torque wrench V.A.G 1601
2 - Vibration damper
^
Use counter hold T10069 to remove and install
3 - 10 Nm
4 - Sealing flange
^
Coat sealing surfaces with sealant D 176 501
^
With seal
5 - Cylinder block
6 - Sealing flange
^
Coat sealing surfaces with sealant D 176 501
7 - Seal
^
Remove using pulling hook T20143/2
^
PTFE version of oil seal,
-
Identification: no inner coil spring
^
Do not additionally oil or grease sealing lip of oil seal
^
Before installing, remove oil remains from crankshaft journal with a clean cloth