R32 4Motion V6-3.2L (CBRA) (2008)
/Page-457001.png)
Piston Ring: Testing and Inspection
Piston, Rings and Cylinder Bore, Checking
Piston Ring Gap, Checking
Special tools, testers and auxiliary items required
^
Feeler gauge
Test Sequence
-
Push ring squarely from above down to approximately 15 mm from bottom end of cylinder. To do this use a piston without rings.
Ring to Groove Clearance, Checking
Special tools, testers and auxiliary items required
^
Feeler gauge
-
Clean ring groove before checking.
