R32 4Motion V6-3.2L (CBRA) (2008)
Crankshaft Main Bearing Seal: Service and Repair
Oil Seal, Flywheel Side
Special tools, testers and auxiliary items required
^
Pulling fixture T10122
^
Extractor hook T20143
Removing
-
Place pulling hook T20143/2 behind sealing lip of sealing ring as shown in the illustration.
-
Support pulling hook T20143/2 on sealing flange and pry out sealing ring in - direction of arrow -.
Installing
-
Pull the seal - A - with the outer side over the sleeve T10122/1 onto the assembly tool T10122/2.
-
Separate both assembly sleeves.
-
Then place assembly tool T10122/2 with dry sealing ring on to crankshaft pin.
-
Now knock it into sealing flange until it stops using assembly tool T10122/3.