R32 4Motion V6-3.2L (CBRA) (2008)
-
Push the bracket toward the brake pedal - arrow - and fasten it there using a cable tie.
-
Mark connector - C - to control motor (danger of interchange with other connectors of same construction).
-
Disconnect connector - C - on Left Temperature Door Motor V158.
-
Remove cover - A -.
-
Remove bolts - D - (1.4 Nm) and remove Left Temperature Door Motor V158 - B -.
-
Disengage control motor lever - E - from connecting rod - F -.
Installing
NOTE: Optimized motors are marked with an "X".
For improved installation, use a raised head screw N 103 254 01 which has been shortened 2 mm.
-
Remove the mount - 1 - from the old temperature regulator door motor V158 using, for example, a diagonal cutter.
-
Mount the new Left Temperature Door Motor V158 marked with an "X" using the shortened raised head screw - 2 - to the detached mount - 1 - to
the bracket - 3 - on the blower case.
NOTE:
-
After installing, function of left temperature door must be checked.
-
Initiate "Basic Setting" function with Vehicle Diagnosis, Testing and Information System VAS 5051 (or succeeding model)
Right Temperature
Right Temperature