R32 4Motion V6-3.2L (CBRA) (2008)
Rear Knuckle: Service and Repair
Wheel Bearing Housing (Aluminum Subframe)
Wheel Bearing Housing (Rabbit, Aluminum Subframe AWD)
Special tools, testers and auxiliary items required
^
Torque Wrench V.A.G 1332
Removing
-
Remove coil spring.
-
Loosen outer drive axle connection.
-
Remove wheel.
-
Remove brake carrier and brake caliper and tie to body with wire.
Note: Suspend brake caliper from body.
-
Remove Phillips screw for brake disc and take out brake disc.
-
Remove ABS speed sensor from wheel bearing housing.
-
Remove bolt -arrow-.
-
Remove bolt for tie rod -1-, upper transverse link -2- and lower transverse link -3- from wheel bearing housing -4-.
-
Remove connecting link -arrow- from the wheel bearing housing.
-
Hold wheel bearing housing and remove bolts -arrows-.
-
Pull coupling rod -1- out of longitudinal control arm.