R32 4Motion V6-3.2L (CBRA) (2008)
-
Pull on output flange with two arm puller -A-.
A - Two arm puller e.g. Kukko 20/10
-
Position pulling hook on underside of drive pinion housing.
-
Coat threads on new hex nut with locking compound D 000 600.
-
Tighten new output flange hex nut, tightening specification
A - Socket attachment SW 36 for 3/4 inch drive
-
Install bevel gear transfer case.
-
Add gear oil to bevel box.
Seal Between Bevel Box and Transmission
Seal between Bevel Box and Transmission (All Wheel Drive) - 02E, 6 Speed DSG A/T AWD
Special tools, testers and auxiliary items required
^
Pulling hook T20143
^
Used oil collection and extraction device V.A.G 1782
^
Thrust piece T10243
Procedure
-
Remove bevel gear transfer case.
Place the used oil collection and extraction device V.A.G 1782 under the transmission.
-
Pry out sealing ring on transmission with pulling hook T20143/1 or T20143/2.