R32 4Motion V6-3.2L (CBRA) (2008)
Seals and Gaskets: Service and Repair
Rear Final Drive Flange Shaft Seals
Rear Final Drive Flange Shaft Seals
Note: The mark -arrow A- on the bottom side of the final drive identifies which final drive is installed.
Special tools, testers and auxiliary items required
^
Extractor lever VW 681
^
Puller T10037
^
Thrust piece T10049
^
Drip tray for VAS 6100 VAS 6208
^
Sealing grease G 052 128 A1
Removing
-
Remove the drive axle.
-
Place the drip tray under the rear final drive.
Left Flange Shaft, Removal
-
Screw a M8 nut -arrow- on puller T10037 threads until it is flush with beginning of threads.
-
Remove flange shaft with puller T10037.
Right Flange Shaft, Removal
-
Screw a M8 nut -arrow- on puller T10037 threads until it is flush with beginning of threads.
-
Remove flange shaft with puller T10037.