R32 4Motion V6-3.2L (CBRA) (2008)
Wiper Motor: Service and Repair
Rear Window Wiper Motor
Rear Window Wiper Motor
Special tools, testers and auxiliary items required
-
Torque Wrench V.A.G 1331
Removing
-
Remove the lower trim from the rear hatch.
-
Disconnect electrical connection - 1 -.
-
Rotate clip at hose connection to release - 2 -.
-
Remove hose connection from Rear windshield wiper motor.
-
Remove nuts - arrows -.
-
Carefully pull off Rear Window Wiper Motor from rear lid.
Installing:
Install in reverse order of removal, noting the following:
-
Check seal for correct fitting in rear window opening. Marking - 1 - of seal must align with marking - 2 - on rear window.
-
Reconnect battery.