Rabbit L5-2.5L (BGQ) (2008)
Fluid - A/T: Service and Repair
ATF, Draining
ATF, Draining - 09G, 6 Speed A/T FWD
-
Turn off engine.
-
Remove sealing plug in oil pan -arrow- to check ATF.
-
Remove overflow tube -1- through check hole.
-
Drain ATF.
-
Install overflow tube.
-
Install sealing plug hand tight.
-
Add 3 liters ATF through filling tube.
-
Start engine, shift through all selector lever positions, you must remain shifted in each position approximately 10 seconds.
-
Then check ATF level and top off.