Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-1451003.png)
‹› Attach the wheel pick-ups onto wheels so that any installed anti-theft wheel mounting bolts are not connected to the wheel bolt adapters.
-
Adjust paddle with aid of locking nuts so that they move freely just above the floor.
Make sure the paddles move easily.
-
Position the calibration device (VAS 6350/4) behind the vehicle with a distance of 1.2 m to 1.7 m between the angled brackets on the calibration
device and the paddles at the rear wheel center wheel mounts as shown in the overview illustration - dimension A - => [ (Item 9) ].
-
Bring calibration tool for lane changing assist ( VAS 6350/4) to a horizontal position. To do so, twist plastic feet under calibration device so that
air bubble in spirit level is located exactly in the center of the indicator - arrow -.
-
Switch on the laser on the calibration device - 1 - and align the entire calibration device so that laser beam strikes on center of vehicle rear end
above the VW logo.
