Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
-
Guide the belt anchor through the opening in the trim.
Installing
‹› Before installing, check the mounting clamps and replace if necessary.
-
Installation is performed in the reverse order of removal.
-
Make sure, that the trim is placed in the in the door seal tubing.
Lower B-Pillar Trim
Lower B-Pillar Trim
‹› Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
Vehicles with interior monitoring (driver side)
-
Switch off ignition.
All vehicles
-
Remove the upper trim on the B-pillar from the brackets => [ Upper B-Pillar Trim Mounts ] See: Upper B-Pillar Trim Mounts
-
Remove the trim - 1 - in the upper area form the body - arrow A -.