volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Driver Front Airbag Crash Sensor|Page 5801 > < Driver Front Airbag Crash Sensor|Page 5799
Page 4
background image

-

Further installation is in reverse order of removal.

-

Switch on ignition.

CAUTION!
Make sure that no one is in the vehicle.

-

Connect vehicle battery.

Passenger Side Airbag Crash Sensor

Passenger Side Airbag Crash Sensor

‹› The Front Passenger Side Airbag Crash Sensor (G180 ) is located on the front door subframe.

CAUTION!
Observe safety precautions for working on airbags => [ Airbag Safety Precautions ] 
See: Service Precautions/Airbag Safety Precautions

-

Disconnect vehicle battery.

-

Remove passenger's side front door trim => [ Front Door Trim ] See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door
Panel/Service and Repair/Front Door Trim

-

Remove the front door subframe.

Removal and installation of Front Passenger Front Airbag Crash Sensor (G180) is identical to removal and installation of the Driver Side Airbag
Crash Sensor (G179) and the procedure can be derived from this:

‹› Driver Side Airbag Crash Sensor (G179), Removing and Installing=> [ Driver Side Airbag Crash Sensor ] See: Driver Side Airbag Crash Sensor

Rear Side Airbag Crash Sensor, Driver Side

Driver Front Airbag Crash Sensor|Page 5801 > < Driver Front Airbag Crash Sensor|Page 5799