Touareg V8-4.2L (AXQ) (2006)
Glove Box Lamp Switch: Service and Repair
Glove Compartment Light Switch E26, Removing And Installing
NOTE:
-
The illustration shows Glove Compartment Light Switch E26 -1 - with instrument cluster removed. The instrument panel does not need to be
removed in order to remove and install the switch.
-
Glove Compartment Light Switch E26 -1 - can be reached starting from foot well and can be undipped.
-
The wire to Glove Compartment Light Switch E26 -1 - is long enough to pull the Glove Compartment Light Switch E26 with wire connected into
foot well and then to disconnect the harness connector.
Removing:
-
Unclip Glove Compartment Light Switch E26 -1 - with connected wire from bracket - A arrows -.
-
Pull Glove Compartment Light Switch E26 -1 - downward behind instrument cluster -arrow B - and disconnect connector.
Installing:
Install in reverse order of removal.