Touareg V8-4.2L (AXQ) (2006)
/Page-1942010.png)
caused by unintentional separation.
The left and right tie rods are identical.
They can be removed and installed with the steering gear in the vehicle.
-
Remove front wheel.
-
Press off tie rod from wheel bearing housing.
-
Clean outside of power steering gear in area of boot.
-
Open clamp and push back boot.
-
Remove tie rod using open-jaw torque wrench insert (VAG 1923).
Installing
Installation is the reverse of removal, with special attention to the following:
-
Tighten tie rod using open-jaw torque wrench insert (VAG 1923).
