Touareg V8-4.2L (AXQ) (2006)
Flex Plate: Service and Repair
Sealing Flanges and Drive Plate, Assembly Overview
Sealing Flanges and Drive Plate, Assembly Overview
‹› Engine is to be secured to Engine and Transmission Holder (VAS 6095) for performing assembly work.
1
Gasket
‹› Replace
2
Sealing flange
‹› With seal
‹› To remove and install, remove oil pan --> [ Oil Pan, Assembly Overview ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil
Pan/Service and Repair
‹› Must be located on alignment bushings
‹› Before installing, remove oil remains from crankshaft journal with a clean cloth
‹› Do not additionally oil or grease sealing lip of sealing ring
‹› To install, use provided support sleeve
‹› Support sleeve may only be removed after the sealing flange has been slid onto crankshaft pin.
‹› If sealing flange is not replaced, use assembly tool (T10122) to install --> [ Crankshaft Seal, Vibration Damper Side ] See: Engine, Cooling
and Exhaust/Engine/Seals and Gaskets/Front Crankshaft Seal/Service and Repair, Sealing flange (drive plate side), removing and installing