Touareg 2 V6-3.6L (BHK) (2008)
-
Press the new bonded rubber bushing - A - with pressure piece (T10214/3) into the guide sleeve (T10214/2), until the pressure piece (T10214/3)
is flush with the guide sleeve (T10214/2).
-
Align the bonded rubber bushing to the transmission carrier, using the assembly tool (T10214).
-
For this, align the bolts - A - and/or the notch - arrow - on pressure piece (T10214/3) centrally to the holes in the transmission carrier.
The spacing "x" must be the same.
-
Now, press the bonded rubber bushing into the transmission carrier, until the guide sleeve (T10214/2) can be turned by hand - arrows -.