Up!
|
|
|
Note| t | If bolts are loosened -4-, it is possible to adjust striker pin -1- in the oversized holes of hinge -arrows a- and -arrows b-. |
| t | Adjust striker pin -2- so that the recess of the rear lid lock with rotary latch is centred relative to the striker pin -2- when it engages. |
| Carry out following work: |
| – | Loosen bolts -1-. |
| – | Move striker pin -2- into upper position and tighten bolts -1-. |
| – | Close rear lid and make sure adjustment has been carried out correctly. |
| Specified torque for bolts -1-: 20 Nm. |
