Assembly overview - front bumper and bumper assembly
| Assembly overview - bumper |
Note| There may be minor differences between bumper covers, depending on vehicle model. |
| 1 - | Front bumper cover |
| q | Material PP/EPDM. |
| q | Removing and installing → Chapter |
| 2 - | Side guide |
| q | Left and right. |
| 3 - | Bolt |
| q | Qty. 3. |
| q | Specified torque: 2 Nm |
| q | Bolted to lock carrier. |
| 4 - | Locking lug |
| q | Qty. 4. |
| q | Engaged in lock carrier. |
| 5 - | Bolt |
| q | Left and right. |
| q | Points upwards. |
| q | Specified torque: 2 Nm |
| 6 - | Bolt |
| q | Qty. 2 on each side. |
| q | Specified torque: 2 Nm |
| q | Bolted to wheel housing liner. |
| 7 - | Spreader rivet |
| q | Qty. 1 on each side. |
| q | Secured to wheel housing liner. |
| 8 - | Spreader rivet |
| q | Qty. 4. |
| q | Secured lock carrier from below. |
