volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Lettering and emblems > < Removing and installing front wheel housing liner

Up!

Removing and installing sill panel cover
   
Removing and installing sill panel cover
  Note
Only the left side is shown. The right side is similar.
Carry out following work:
Removing
–  Remove bolts -2-.
–  Remove sill panel cover -1- downwards.
Installing
  DANGER!
Check the two gas-tight spreader nuts -3- for damage and renew if necessary.
The spreader nuts seal the interior against exhaust gases and have to be renewed without fail in the event of damage.
  Note
Check spreader nut -4- for damage and renew if necessary.
–  Position sill panel cover.
–  Tighten bolts -2- to specified torque of 2 Nm.

   

Lettering and emblems > < Removing and installing front wheel housing liner